Manufacturer : BETAFPV / Référence : 01040011_1
F411 4S 20A Brushless FC BLHeli_S V5 By BetaFPV
Hors stock
€79.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
This fifth version of FC F411 includes a 20A ESC and a BMI270 gyroscope. In addition, this board has plug&play ports for the receiver and the HD digital VTX, which will require less work for you to solder.
Little reminder: upon receipt of your item, please connect it via USB and calibrate the accelerometer before starting to weld.
Bullet points
- Large pads for easier soldering
- Plug&play ports for receiver and digital HD VTX
- High quality MOSFETs
- Reinforced engine welding pads
FC Specifications
- MCU : STM32F411CEU6 (100MHZ)
- Six-Axis: BMI270 (SPI connection)
- Mounting Size: 25.5*25.5mm
- FC Firmware: betaflight_4.3.x_BETAFPVF411
- OSD: Built-in Betaflight OSD (OSD chip: AT7456E)
- Receiver: SBUS/CRSF/DSMX Receiver
- BEC: 5V 3A
- Built-in current sensor
- Weight: 8.15g
ESC Specifications
- ESC Chip: SILABS EFM8BB21F16G-C
- Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
- Input voltage: 2S-4S Lipo
- Continuous current: 20A
- Peak current: 25A
- Firmware: G_H_20_REV16_7.HEX (Default BLHeli_S), BLUEJAY (Optional)
Recommended parts (not included)
- motors : 1404 / 1506
- Battery: 2S 600mAh / 3-4S 850mAh / 4S 750mAh / 4S 1000mAh
- Frame: Pavo25 / X-knight 35...
Included
- 1x F411 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (BMI270)
- 1x Cable Pigtail (XT30)
- 1x 6-Pin Connector for Digital VTX
- 1x 4-Pin Connector for RX
- 4x M2x10 Screws
- 4x M2 Nuts
- 4x M2 Anti-vibration rubber dampers