En stock
GNSS & Compass M10Q-5883 By Matek
€44.90
Price
Manufacturer : Speedy Bee / Référence : SB-F405WING-MINI
F405 WING Mini Flight Controller By SpeedyBee
Hors stock
€44.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
The F405 WING Mini flight controller from SpeedyBee is intended for airplanes as well as FPV quads.
Compatible with most HD and analog VTXs, this FC consists of an STM32F405 processor, an ICM-42688P gyroscope, an SPL006-001 barometer, an AT7456E OSD as well as 6 UARTS.
In addition to supporting INAV and ArduPilot, the F405 WING Mini allows you to configure it from the SpeedyBee and QGroundcontrol applications.
An integrated switch gives you the possibility of switching from one analog camera to another to benefit from more viewing angles.
Optimal heat dissipation, TVS protection diode, current sensor and buzzer are features that will ensure safety.
F405 WING Mini FC
- MCU : STM32F405, 168MHz, 1MB Flash
- IMU(Gyro&Accelerometer) : ICM-42688-P
- Barometer : SPL006-001
- OSD Chip : AT7456E
- Blackbox : MicroSD Card Slot
- UART : 6 sets (USART1, USART2, USART3, UART4, UART5, UART6 - Dedicated for Wireless board Telemetry connection)
- I2C : 1x Used for magnetometer, digital airspeed sensor
- ADC : 4x (VBAT, Current, Analog RSSI, Analog AirSpeed)
- PWM : 12x (9x pin headers + 2x solder pads + 1x "LED" pad)
- ELRS/CRSF Receiver : Supported, connected to UART1
- SBUS : Built-in inverter for SBUS input (UART2-RX)
- LED : 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red)
- Analog RSSI : Supported, Named as "RS"
- Dual Analog Camera Switching : Default to Camera1 Video Input (C1). Switch between C1 and C2 using ArduPilot Relay or INAV Modes/USER. Both cameras should have the same video format, either PAL or NTSC.
- Supported FC Firmware : INAV: SpeedyBeeF405WING (default) / ArduPilot : SpeedyBeeF405WING
- Weight : 5.6g
PDB
- Input voltage range : 7~26V (2~6S LiPo)
- Battery Voltage Sensor : Connect to FC board VBAT, 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
- Battery Current Sensor : 80A continuous, 150A peak Connect to FC board Current (Scale 195 in INAV, 50 A/V in ArduPilot)
- TVS Protective diode : Yes
- FC BEC output : Output 5.2V +/- 0.1V DC Continuous current 2 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed Sensor, Telemetry module
- Servo BEC output : Output 5V +/- 0.1V DC Continuous current 4 Amps, 5A Peak Voltage adjustable, 5V Default, 6V via jumper Designed for Servos.
- Weight : 5.5g
Included
- 1x F405 WING Mini
- 1x 90 Degree pin header (3x10)
- 3x Straigth pin header (1x10)
- 5x M2x6.5 copper standoff spacer
- 10x M2x3.5 small head cross screw
- 1x White straigth pin header (1x4)
- 5x M2x3+3 copper standoff spacer
- 1x 35V 470uF Low ESR Capacitor
- 1x 8pin SH1.0mm USB extender cable
- 1x 4pin SH1.0mm Analog VTX cable
- 1x 6pin SH1.0mm GPS module cable
- 1x 6pin SH1.0mm HD VTX cable
- 1x 4pin SH1.0mm to 3pin JST1.25mm FPV cam cable
- 1x 4pin Dupont single head cable
