Ajouter à la Wishlist
Manufacturer : Walksnail / Référence : WN07-6S14B

Avatar HD Kit V2 Dual Antennas Version By Walksnail

Hors stock
€141.58
Type :
15 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Technical characteristics

New version of the Walksnail Avatar HD V2 kit with two antennas for more power!

This kit consisting of the Avatar HD V2 micro camera, the Avatar HD V2 VTX and two antennas will allow you to fly in the most complex conditions thanks to improved transmission performance.

Get video feedback up to 1080p at 60 fps with a low latency of 22ms and record your flights in 1080p at 120 fps thanks to the 32GB internal storage.

Equipped with a 1/3.2" sensor, the micro camera allows video feedback up to 1080p at 60fps in 4:3 or 16:9 format.

This kit has 20x20 and 25.5x25.5mm mounting holes for wider compatibility.

* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.

 licence adéquate.

VTX

  • Model: Avatar Module V2 
  • Communication frequency: 5.725-5.850 GHz
  • Transmitter power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
  • 1/O interface: JST1.0*4 (power supply) JST0.8*6 (USB)
  • Mounting Holes: 25.5 x 25.5mm; 20*20mm
  • Size: 33.5*33.5*10.5mm
  • Storage: 32G
  • Recording: 1080p/720p
  • Weight: 15.4g
  • Operating temperature: -20-40℃
  • Channels: 8
  • Wide power input: 6V-25.2V
  • Supported FC system: Betaflight; Inav; Fettec; ArduPilot; Kiss
  • OSD: Canvas Mode
  • Latency: Average delay 22ms
  • Antenna: 2(IPEX)

V2 Camera

  • Image Sensor : 1/3.2" 4Mp 4:3 sensor
  • Resolution : 1080P/60fps;720P/120fps,
  • 720P/60fps;1080P/120fps compatibility;1080P/100fps
  • Ratio : 16:9; 4:3
  • Lens : 2.1mm
  • FOV : 160°
  • Aperture : F2
  • Shutter : Rolling shutter
  • Min.Illumination : 0.001Lux
  • Weight : 7.2g
  • Dimensions : 19*19*22mm
  • Coaxial Cable : 140mm
  • Gyroflow : 32G supported

Antenna

  • Polarization : LHCP
  • Frequency range : 5600MHz-6000MHz
  • Gain : 1.9dBi
  • VSWR : ≤1.5
  • Input Impedance : 50Ω
  • Interface : IPEX-1
  • Size : R15 X 45mm(without cable)
  • Weight : 2g

Included

  • 1x Avatar HD V2VTX
  • 1x Avatar HD V2 camera
  • 2x IPEX antenna
  • 1x USB transfer extension cable
  • 1x 4 Pin silicone cable
  • 8x M2*4mm screws
  • 4x M2*5mm screws
  • 4x M2*6mm screws
  • 4x M2*14mm screws
  • 4x M2*5*0.5mm gasket
Voir plus