HDZero - Race V3 VTX
Related accessories
Technical characteristics
The HDZero Race V3 is a 540p90, 720p60 and 1080p30 digital video transmitter capable of delivering up to 200mW on the 5.8GHz band.
Designed for the FPV race, this third version has a base voltage range of 4V and can be powered by 5V 1.5A regulator or up to 12V for FCs with a VTX HD socket.
At just 28mm wide, the VTX is now similar in size to many FCs, which will improve durability and reduce weight.
In addition to having larger components for stability, the Race V3 has reverse polarity protection and requires no soldering, only plugging.
* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.
Note: *All HDZero products remain under warranty until out of the box.*
Specifications
- Frequency : 5.725-5.850GHz
- Resolution Default : 540p90/720p60/1080p30
- RF power : 25mw/200mw
- RF Connector : Secured U.FL
- Interface : 4 lane MIPI CSI YUV422
- Video Connector : 20 Position 0.30mm Pitch
- Size : 32mm x 28mm x 5mm
- Weight : 5.5g
- Harness length : 40mm
- Power input : 4V-12V
- Mounting : 20mm x 20mm M4 with rubber grommets
Included
- 1x VTX-R3 board with pre-soldered harness
- 4x Rubber Grommet (M4 to M3)
- 4x u.FL Antenna Retention Screws
- 1x Metal bar
HDZero - Race V3 VTX