Ajouter à la Wishlist
Manufacturer : HDZero / Référence : HDZ3103

HDZero Whoop V2 VTX

Hors stock
€64.90
7 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Technical characteristics

The HDZero Whoop V2 VTX represents the evolution of the renowned Whoop Lite VTX, delivering the same HDZero performance while enhancing durability, reliability, and ease of installation. Designed for demanding pilots, it provides clean, low-latency HD transmission up to 200 mW on the 5.8 GHz band, compatible with all HDZero MIPI cameras, including 540p90, 720p60, and 1080p30 formats.

Its thicker PCB ensures greater impact resistance, while the factory pre-soldered wiring harness with a Betaflight standard digital VTX connector makes installation effortless. Additionally, the brass retention bar keeps the U.FL connector firmly secured, even during crashes or heavy vibrations.

With its compact 31 × 31 mm footprint and 25.5 × 25.5 mm mounting pattern, the Whoop V2 fits perfectly on both 80 mm whoops and 4-inch micro drones.

* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.

Note: *All HDZero products remain under warranty until out of the box.*

Specifications

  • Supported Cameras : All HDZero MIPI cams
  • Video Resolution : 720p60 / 540p90 / 1080p30
  • RF Power Output : 25 mW / 200 mW
  • Frequency Range : 5.725 – 5.850 GHz
  • RF Connector : Secured U.FL with brass bar
  • Video Connector : MIPI
  • Durability / PCB : Thicker PCB for impact resistance
  • Wiring / Install : Pre-soldered wire harness
  • Size : 31 × 31 mm (29 × 29 inner)
  • Mounting Pattern : 25.5 × 25.5 mm (M2)
  • Weight : 5.4 g (5.1 g w/o wires)
  • Board Thickness : ~1.6mm
  • Power Input : 3 – 12.6 V (1S – 3S)
  • Power Consumption : 5 – 6 W
  • Control / OSD : MSP OSD / Smart Audio
  • Recommended Use : 80 mm whoops – 4″ micro drones
  • Antenna not included

Included

  • 1x HDZero Whoop V2 VTX
  • 5x Power/Uart Cable
  • 2x Zip ties
  • 4x Rubber Grommet (M3 to M2)
  • 3x u.FL Antenna Retention Screws
  • 1x Metal bar
Voir plus