Manufacturer : BETAFPV / Référence : 01040018_2
Matrix 1S G473 12A 3in1 AIO V1.0 By BetaFPV
En stock
€48.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
BetaFPV's Matrix brushless AIO is specifically designed for 1S HD whoops. Designed exclusively for digital FPV, the analog OSD has been removed to integrate a G473 flight controller, 12A ESC, and ExpressLRS 2.4G receiver.
Equipped with a newly developed BEC and ESC, the Matrix sports effortless setup and maintenance with its iconic cross-shaped design.
Note : upon receipt of your item, please connect it via USB and calibrate the accelerometer before starting to solder.
FC
- MCU: STM32G473CEU6 (168MHz)
- Gyro: ICM42688P
- Blackbox memory: 16MB
- Sensor: Voltage & Current
- BEC: 5V/3A
- UART: UART 1 (RX Only/SBUS), UART 2 (Free), UART 3 (For RX), UART 4 (Free/HD MSP)
- ESC: 12A continuous
- RX: Serial ELRS 2.4GHz (V3.4.3)
- FC firmware: Betaflight_4.5.1_BETAFPVG473
- USB port: SH1.0-4Pin
- HD Digital VTX Port: SH1.0-6Pin
- Motor plug: JST1.25-3Pin
- Battery connector: BT2.0
- Mounting size: 25.5mm x 25.5mm
- Weight: 3.2±0.1g (battery connector excluded), 4.2±0.1g (battery connector included)
ESC
- Power input: 1S Only
- Current: 12A continuous, 18A peak
- ESC firmware: A_X_5_96_v0.19.2.hex for BB51 Bluejay firmware
- Digital signal protocol: DSHOT300, DSHOT600
Bullet points
- Optimized for 1S whoops
- Compatible with DJI O4
- 3in1 FC/ESC/RX ELRS 2.4G
- 12A current
- Convenient motor plugs
- HD SH1.0 digital port
- Solderless maintenance
Included
- 1x Matrix 1S 3en1 AIO
- 1x Type-C to SH1.0 Adapter
- 1x SH1.0 4Pin Adapter Cable
- 1x SH1.0 6Pin Adapter Cable
- 4x M1.2*4 Self-tapping Screws
- 4x M1.2*5 Self-tapping Screws
- 4x Shock Absorbing Ball
Matrix 1S G473 12A 3in1 AIO V1.0 By BetaFPV
En stock
€48.90