Lethal Conception - Bando Killer V2 (7")
Related accessories
Caractéristiques techniques
The Bando Killer 7" is a 7" frame, dedicated to freestyle in abandoned places: Bandos ! (and more)
It was born from the collaboration of 2 majors actors of the french FPV scene, the pilot Thomas Panaiva (TomZ) and the manufacturer Lethal Conception.
Here it is back in a brand new reworked and improved version based on feedback from many users.
Same philosophy but updated:
- Analog/digital compatible
- Optimized for any type of stack
- Better accessibility to electronics
- Fewer propellers in the field of view thanks to the new geometry
- Reinforced bottom plate
The Bando Killer V2 7" from Lethal Conception has been developed to offer the best performances in hostile aeras.
This agile, precise and strong frame is perfect to face the hardest freestyle spots !
Find Lethal Conception on Facebook:
Included :
- 1 x Top Plate 2mm
- 1 x Front Cage Plate 2mm
- 1 x Bottom Plate 2.5mm
- 4 x 7" Arm 6mm
- 1 x Cross Plate 2mm
- 2 x Camera Plate 2mm
- 2 x Bumper 4mm
- 2 x Strap Plate 2.5mm
- 1 x Rear Stackable Support 2mm
- 1 x Dji Set 4mm
- 1 x Nebula Pro adapters (pair)
- 1 x Immortal T Tpu support
- 1 x Pigtail Tpu support
- 1 x Vista antenna Tpu support
- 1 x Dji antenna Tpu support
- 1 x Tpu Spacer cover
- 1 x Silicon Lipo Pad
- 1 x 12.9 Steel screw bag
Characteristics
- - SIZE : 308mm Squished X
- - CARBONE : T300 Full layer Plain Mat
- - INTERNAL SPACE : 22mm
- - STACK PATTERN: 20x20, 30.5x30.5mm
- - MOTOS PATTERN : 16x16, 16x19? 19X19mm
- - WEIGHT : 168 grammes
- - COMPATIBLE WITH : Air Unit, Vista, Analog VTX (28x28 mm cam)
Example configuration
- - ESC : Hobbywing Xrotor Micro 60A 4in1
- - MOTors : T-Motor F90 Pro - 1300kV
- - FC : Hobbywing Xrotor Flight Controller F4 G3
- - VTX : Caddx Vista
- - CAMERA : Caddx Nebula Pro
- - ANTENNA : Lumenier AXII 2 Long Range 5.8GHz LHCP
- - RX : TBS Crossfire Nano RX + Immortal T
- - BATTERy : Batterie Lipo Tattu R-Line 6S 1400mAh 130C
- - PROPS : Gemfan 7040-3
Customer reviews
Всё супер
The carbon is ok, maybe the top plate could be a bit thicker. The disappointing part is the hardware supplied, the screws are super poor quality (in many years of building drones I had never seen such bad screws) and I also had to re-thread some spacers. I ended up buying some new screws from the local hardware store but I'm so disappointed in the quality I won't be using this frame, will look for a quality one.
