En stock
VRX Avatar Receiver Module By Walksnail
€208.25
Price
Manufacturer : Walksnail / Référence : WN08-6S14B
Avatar HD PRO Kit Dual Antennas Version By Walksnail
En stock
€162.42
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
New version of the Walksnail Avatar HD PRO kit with two antennas for more power!
This kit consisting of the Avatar HD Pro micro camera, the Avatar HD Pro V2 VTX and two antennas will allow you to fly in the most complex conditions thanks to improved transmission performance.
The new VTX with improved TVS protection supports 6S with wide input voltage ranging from 6V to 25.2V.
Get video feedback up to 1080p at 60 fps with a low latency of 22ms and record your flights in 1080p at 120 fps thanks to the 32GB internal storage.
Featuring a 1/1.8" Sony Starvis II sensor, the camera offers excellent night vision, plus it supports Gyroflow for smooth and stable video.
This kit has 20x20 and 25.5x25.5mm mounting holes for wider compatibility.
A spare pad has been added to provide two modes of electrical connection.
* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.
licence adéquate.
VTX
- Model: Avatar Module V2 Pro
- Communication frequency: 5.725-5.850 GHz
- Transmitter power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
- 1/O interface: JST1.0*4 (power supply) JST0.8*6 (USB)
- Mounting Holes: 25.5 x 25.5mm; 20*20mm
- Size: 33.5*33.5*10.5mm
- Storage: 32G
- Recording: 1080p/720p
- Weight: 15.4g
- Operating temperature: -20-40℃
- Channels: 8
- Wide power input: 6V-25.2V
- Supported FC system: Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD: Canvas Mode
- Latency: Average delay 22ms
- Antenna: 2(IPEX)
PRO Camera
- Image Sensor : 1/1.8-Inch Sony Starvis Ⅱ Sensor
- Resolution : 1080P/60fps;720P/120fps,
- 720P/60fps;1080P/120fps compatibility;
- Ratio : 16/9; 4/3
- Lens : 8Mp
- FOV : 160°
- Aperture : F1.6
- Shutter : Rolling shutter
- Min.Illumination : 0.00001Lux
- Weight : 9.5g
- Dimensions : 19*19*24mm
- Coaxial Cable : 140mm
Antenna
- Polarization : LHCP
- Frequency range : 5600MHz-6000MHz
- Gain : 1.9dBi
- VSWR : ≤1.5
- Input Impedance : 50Ω
- Interface : IPEX-1
- Size : R15 X 45mm(without cable)
- Weight : 2g
Included
- 1x Avatar HD Pro VTX
- 1x Avatar HD Pro camera
- 2x IPEX antenna
- 1x USB transfer extension cable
- 1x 4 Pin silicone cable
- 8x M2*4mm screws
- 4x M2*5mm screws
- 4x M2*6mm screws
- 4x M2*14mm screws
- 4x M2*5*0.5mm gasket
Customer reviews
Good build quality and the picture looks good too. Even flying in low light works very well. Just be carefull with the small cables and ribboncable
as good as the first time!!! :P
Got what I needed!
Did not get to make it work yet. With a step up voltage bec it does not work. I am waiting for a step down voltage Bec from drone fov racer. But what I can still complain is that the camera seemed not to be new. It had a black spot like oil or something on it.
Fonctionne très bien. Bonne image même en faible luminosité
Ok bien
Nice! it's walksnail!!!
