Kotking Transparant 15mL

How To Apply

• 1. tear down all parts so you can easily put Kotking on them, no need to unsolder
• 2. Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or any other thing that cover it
• 3..Apply Kotking to all component such as FC, VTX, Camera board evenly and slowly. You can use our tiny brush or wood
• 4. Put them in balanced position and let them dry for about 15-20min, and you can do the same for the low sider later
• 5. To coat FPV Camera you can put Kotking on camera connector, on camera case especially on connection between case and FPV camera focus ring

Warning:

• The use of tropicalizer results in the cancellation of the manufacturer's warranty.
• The tropicalizer product acts as a layer of varnish and is composed of a water base.
• The addition of tropicalizer product is an exclusion of support support by the manufacturers because it modifies the thermal capacities and creates short circuits if it is not dry enough.