Ajouter à la Wishlist
Manufacturer : Holybro / Référence : 20194

Kakute H7 V1.3 + Tekko32 F4 50A Stack By Holybro

En stock
€179.00
€152.15
-15%
Last items in stock

16 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Related products

Technical characteristics

This stack consists of the Kakute H7 V1.3 flight controller and the Tekko32 F4 4in1 50A ESC.

Holybro's Kakute H7 V1.3 Flight Controller is loaded with features like built-in Bluetooth, HD camera jack, dual 4in1 ESC ports and more.

The version builds on the better performance of its F7 predecessor and further improves the components and layout.

Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.

KakuteH7_v.13_Overview.jpg?v=1692150956spaces%2FLIgtGDAvVGkCKGOJb1bR%2Fuploads%2FCWcEJLfS4CCcQxeX92mq%2FKakuteH7v2_Wiring_Diagram1.jpg?alt=media&token=3dbc584e-3003-406e-a003-18154e1563e0

FC

  • MCU - STM32H743 32-bit processor running at 480 MHz
  • IMU - MPU6000
  • Barometer - BMP280
  • OSD - AT7456E
  • Onboard Bluetooth chip - ESP32-C3
  • 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
  • 9x PWM Outputs (8 Motor Output, 1 LED)
  • 2x JST-SH1.0_8pin port (4in1 ESCs, x8/Octocopter compatible)
  • 1x JST-GH1.25_6pin port (For HD System like Caddx Vista & Air Unit)
  • Battery input voltage: 7V to 42V
  • BEC 5V 2A Cont.
  • BEC 9V 1.5A Cont.
  • Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
  • Dimension - 35x35mm
  • Weight - 8g

ESC

  • Continuous Current: 50A x4
  • Burst Current: 60A x4
  • Supports 4-6S battery
  • Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
  • ESC telemetry Supported
  • Onboard analog current sensor
  • No output BEC
  • BLHeli_32 firmware
  • 1000uf 35v capacitor included (highly recommended for 6s setup)
  • Amperage meter scale ratio: 168
  • Dimensions: 45x37x6mm / Weight: 13.8g
  • Mounting holes: M4 30.5x30.5mm (M3 grommets included)

Included

  • 1x  Kakute H7 V1.3 STACK
  • 1x  Electrolytic capacitor: 1000uF 35v 
  • 1x  8pin to 8pin 1mm pitch 65mm cable
  • 1x  8pin to 8pin 1mm pitch 25mm cable
  • 1x  JST GHR 8pin to JST GHR 6pin 80mm cable (for DJI/Caddx HD System)
  • 1x  JST GHR 6pin 100mm cable(for Caddx HD Systems)
Voir plus

Découvrez aussi

Kakute H7 V1.3 + Tekko32 F4... Kakute H7 V1.3 + Tekko32 F4 50A Stack By Holybro
En stock
€179.00
€152.15
-15%