Manufacturer : HDZero / Référence : HDZ5000
HDZero AIO5
En stock
€119.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
HDZero AIO5 is the world's first digital video AIO to link and fly 65mm whoops.
This HDZero X Happymodel collaboration integrates an F4 flight controller, an HDZero 5.8GHz digital video transmitter, a 2.4GHz ExpressLRS 3.0 SPI receiver, a 4in1 ESC with DSHOT protocol and a 5V/1A BEC. The minimum voltage has been improved to 2.5V, which ensures that the video never stops transmitting before the motors stop working.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Specifications
- MCU: STM32F411 (100MHz, 512K Flash)
- Gyro: BMI270
- On board voltage and amperage meters
- Built-in 5A(each) BLHeli_S 4-in-1 ESC
- MCU: EFM8BB21
- HV Current: 5A continuous peak 6A (3 seconds)
- Factory firmware: O_H_5_48_V0.19.2.HEX
- Dshot600 ready
- Built-in 5.8G HDZero VTX
- RF output: 25mw/200mW
- Supported channels: R1-R8, F2/F4, L1-L8
- UFL connector (ultra-lite linear antenna included)
- Built-in SPI ExpressLRS 2.4GHz receiver
- Packet rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- Pre-soldered enamel wire antenna
- Telemetry output power: <12dBm
- Built-in 5V 1A BEC
- Flight controller firmware target: CRAZYBEEF4SX1280
- Power supply: 1S battery (2.5V – 4.35V)
- Fully compatible with the popular whoop frames
- Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size
- Weight: 5.7g(without motor plugs), 6.3g (with motor plugs)
Included
- 1x HDZero AIO5 board
- 1x Power cable with inverted angle A30 connector
- 4x screws
- 4x rubber grommets
- 1x ultra-lite linear VTX antenna
HDZero AIO5
En stock
€119.90