En stock
VIFLY Drone Finder 2
€12.90
Price
Manufacturer : Skystars / Référence : SKY-150707
-15%
F722 HD Pro4 30x30 Flight Controller - Skystars
En stock
€52.90
€44.96
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
The Skystars F722 HD Pro4, DJI O3 compatible has now a MPU6000 gyro.
Specifications
- MCU: STM32F722RGT6 216MHz
- Gyroscope: MPU6000
- Baro:Bmp280
- OSD: Betaflight SPI OSD DJI HD OSD(UART6)
- Black box: 16MB
- 6x Uarts: UART 1/2/3/4/5/6
- 4x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type-C(USB2.0)
- 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
- VTX 10V/Vbat filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
- LED: 4 LED independent pads, support WS2812 programming lamp output.
- Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
- Input voltage: 3-6S
- BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
- LDO 3.3V: Max.250mA
- BetaFlight firmware: SKYSTARSF722Pro
- INAV firmware:SKYSTARSF722HD
- Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
- External size 39mm × 39mm
- Flight control weight: 6.9g
- Flight control onboard voltage sensor.
Included
- 1x F722 HD Pro4 FC
- 4x Dampers
- 1x JST SH1.0mm Cable for Air Unit
- 2x JST SH1.0 cable for ESC
Customer reviews
Très bien
Bien good
everything is fine. good FC and good quality
bien pour le prix
Pour l'instant pas utilisée, mais bonne première impression (sous Inav)
bon rapport qualite prix cependans le produit semble moins agreable en vole que d'autre fc plus chere
Très bien cette FC
Marche uniquement avec Betaflight 4.3
