
Avatar HD PRO Kit By Walksnail
Technical characteristics
This new version of Walksnail's Avatar HD kit uses H.265 code, an industry-leading technology that helps deliver 1080p FPV image quality with ultra-low latency of 22ms.
The HD PRO camera is equipped with Sony Starvis II technology with 1/1.8" sensor. Supporting 1080P/120fps, this camera offers clear night vision. It supports Gyroflow for more stable and smoother footage.
Now, 20x20mm mounting holes have been added in addition to the 25x25mm ones for even wider compatibility.
* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.
VTX
- Model: Avatar Module V2
- Communication frequency: 5.725-5.850 GHz
- Transmitter power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
- 1/O interface: JST1.0*4 (power supply) JST0.8*6 (USB)
- Mounting Holes: 25.5 x 25.5mm; 20*20mm
- Size: 33.5*33.5*10.5mm
- Storage: 32G
- Recording: 1080p/720p
- Weight: 17.6g
- Operating temperature: -20-40℃
- Channels: 8
- Wide power input: 6V-25.2V
- Supported FC system: Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD: Canvas Mode
- Latency: Average delay 22ms
- Antenna: 1(IPEX)
PRO Camera
- Image Sensor : 1/1.8-Inch Sony Starvis Ⅱ Sensor
- Resolution : 1080P/60fps;720P/120fps,
- 720P/60fps;1080P/120fps compatibility;
- Ratio : 16/9; 4/3
- Lens : 8Mp
- FOV : 160°
- Aperture : F1.6
- Shutter : Rolling shutter
- Min.Illumination : 0.00001Lux
- Weight : 9.5g
- Dimensions : 19*19*24mm
- Coaxial Cable : 140mm
Antenna
- Polarization : LHCP
- Frequency range : 5600MHz-6000MHz
- Gain : 1.9dBi
- VSWR : ≤1.5
- Input Impedance : 50Ω
- Interface : IPEX-1
- Size : R15 X 45mm(without cable)
- Weight : 2g
Included
- 1x Avatar HD Pro VTX
- 1x Avatar HD Pro camera
- 1x USB transfer extension cable
- 1x 4 Pin silicone cable
- 8x M2*4mm screws
- 4x M2*5mm screws
- 4x M2*6mm screws
- 4x M2*14mm screws
- 4x M2*5*0.5mm gasket