Taker H743 BT 32Bit 65A Stack By GEPRC
Related accessories
Technical characteristics
The TAKER H743 BT 32Bit 65A Stack is the latest high-performance stack system developed by the GEPRC team, designed to deliver exceptional results in both freestyle and racing applications. At its core is a powerful STM32H743VIH6 processor, built on a Cortex-M7 architecture and running at up to 480MHz, ensuring lightning-fast response and rock-solid stability in flight.
Equipped with a dual gyroscope setup, combining the MPU6000 and ICM42688-P, this stack offers ultra-precise control and refined handling. Its built-in Bluetooth allows for wireless parameter tuning, while the integrated 512MB Blackbox provides ample storage for flight data logging and post-flight analysis. With eight motor output ports, it’s fully compatible with X8 configurations.
Offering full support for Betaflight, INAV, and Ardupilot, the system is extremely versatile and suited for a wide range of flight styles and firmware preferences. Power distribution is handled by a dual independent BEC, delivering 5V@3A and [email protected], ensuring stable voltage for all essential components.
Additional features include seven UART ports, a built-in barometer, and plug-and-play compatibility for an easy setup process. This stack provides an ultra-smooth, responsive, and reliable flight experience, making it an ideal choice for high-end FPV builds.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
H743 BT FC
- MCU: STM32H743
- IMU: MPU6000 + ICM42688-P(dual gyro)
- Air Unit Connection: direct plug for DJI Air Unit
- Black Box: 512M onboard
- Bluetooth: Supported
- Barometer: Supported
- USB Interface: Type-C
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC Output: 5V@3A,[email protected] dual BEC
- Target: GEPRC_TAKER_H743
- Dimension: 38.5×38.5mm, mounting hole size 30.5×30.5mm
- Input Voltage: 3-6S LiPo
- UART Ports: 7 groups (UART3 fixed for Bluetooth)
- Power Filtering: Integrated LC filter
- Weight: 8.4g
H65_8S_32Bit ESC
- Input Voltage: 3-8S Lipo
- Ammeter: Supported
- Continuous Current：65A
- Burst Current：70A（5 seconds）
- Support Protocol: Dshot 150/300/600
- Dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
- Weight: 15.8g
- Firmware Target: GEPRC_F4_4in1
Bullet points
- Adopts the high-performance STM32H743 as the main controller
- Equipped with MPU6000 and 42688-P dual gyroscopes
- 512MB high-capacity black box storage
- Bluetooth parameter tuning
- Plug-and-play, no soldering required
- Integrated barometer
- Features 7 UART ports
- Independent BEC with [email protected] and 5V@3A outputs
- Supports multiple firmware options
Included
- 1x TAKER H743 BT Flight Controller
- 1x TAKER H65_8S_32Bit 65A 4IN1 ESC
- 1x Electrolytic capacitor(50V 470uF)
- 1x DJI connection cable(SH1.0 6pin 100mm)
- 1x FC adapter cable(SH1.0 8pin 30mm)
- 1x Receiver silicone cable(SH1.0 4pin 150mm)
- 1x Camera connection cable(SH1.0-SH1.25 3pin 60mm)
- 1x VTX connection cable(SH1.0 4pin-6pin 100mm)
- 1x XT60 power cable(12AWG 110mm)
- 4x M3*30 screws
- 4x M3*25 screws
- 8x Nylon nuts(M3)
- 12x Silicone anti-shake pads(M3)
