En stock
VIFLY Drone Finder 2
€12.90
Price
Manufacturer : Holybro / Référence : 20265
Kakute F722 Tekko32 F4 Metal 65A Stack By Holybro
Hors stock
€149.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
This Holybro stack consists of a Kakute F722 flight controller and a Tekko32 F4 Metal 65A 4in1 ESC.
Compatible with both digital and analog VTX, the Kakute F722 Tekko32 F4 Metal 65A has a built-in OSD, 16MB blackbox, LED port and can support up to 8S voltage while providing a stable output of 9V/3A and 5V/2A.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
- MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash
- IMU: ICM42688P (SPI)
- Barometer: BMP280
- OSD: AT7456E
- 5x hardware UARTS (UART1,2,3,4,6)
- 7x PWM Outputs (6 Motor Output, 1 LED)
- Onboard 16 Mbytes for Blackbox logging
- Battery input voltage: 3S - 8S
- BEC: 9V/3A, 5V/2A, 3.3V/0.2A
- Connector
- 2x JST-SH 8pin port for ESC
- 1x JST-SH 6pin port for HD VTX
- 2x JST-SH 4pin port for Receiver & Analog Camera
- 1x JST-SH 3pin port for LED
- USB Type -C
- Dimensions: 35x35mm
- Mounting Holes: Standard 5 x 30.5
- Weight: 8g
- Betaflight Firmware Target: KAKUTEF7MINIV3
- INAV Firmware Target: KAKUTEF7MINIV3
ESC
- Continuous Current: 65A x4
- Peak Current: 75A x4
- Supports 4-6S battery
- Supports DShot 150/300/600/1200 and MultiShot/OneShot/Proshot/PWM etc.
- ESC Telemetry Supported
- Built-in Analog Current Sensor
- No BEC Output
- AM32 Firmware
- Version firmware : AT32DEV_F421 V2.08
- 1000uF 35V Capacitor Included (Highly Recommended for 6s Setup)
- Ammeter Scale Ratio: 180
- Dimensions: 43x44mm
- Weight: 15.8g
- Mounting Holes: M4 30.5x30.5mm
Included
- 1x Kakute F722 Tekko32 F4 Metal 65A Stack
