Ajouter à la Wishlist
Manufacturer : Skystars / Référence : SKY-150710

F722HD PRO4 + KM60A Stack By Skystars

Hors stock
€118.90
Out-of-Stock Notify me when the product is available again

12 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)
Related products

Technical characteristics

The SkyStars F722 HD + KM60 stack includes an F722 HD 30x30 Pro4 flight controller with a MPU6000 gyro along with a KM60A 32Bit 3-6S 4in1 ESC to give your quad all the power it needs.

FC Specifications

  • MCU: STM32F722RGT6 216MHz
  • Gyroscope: MPU6000
  • Baro:Bmp280
  • OSD: Betaflight SPI OSD  DJI HD OSD(UART6)
  • Black box: 16MB
  • 6x Uarts: UART 1/2/3/4/5/6
  • 4x PWM outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • USB Type-C(USB2.0)
  • 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
  • 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
  • VTX 10V/Vbat filtered power ON/OFF switch
  • DJI FPV OSD is supported by any spare UART
  • LED: 4 LED independent pads, support WS2812 programming lamp output.
  • Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
  • Input voltage: 3-6S
  • BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
  • LDO 3.3V: Max.250mA
  • BetaFlight firmware: SKYSTARSF722Pro
  • INAV firmware:SKYSTARSF722HD
  • Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
  • External size 39mm × 39mm
  • Flight control weight: 6.9g
  • Flight control onboard voltage sensor.

ESC Specifications

  • Input voltage: 3-6S LiPo(11.1V~25V)
  • Con.Current: 60A 
  • Peak Current: 80A≥ 10S
  • Firmware: BLHeli_32
  • Support : Dshot 300/600/1200
  • Mounting hole : 30.5mm/M3
  • BEC: No
  • Product size: 41*46*7.6mm
  • Weight: 18g

Included

  • 1x SKYSTARS F722HD Pro 4 Flight Controller
  • 1x KM60 60A Brushless 4IN1 ESC
  • 1x 8pin sh1.0
  • 1x Rubycon Hight Frequency 560uF/35V
  • 1x Amass XT60 and wire
  • 4x Silica gel shock absorber
  • 4x 12.9 M3X30 Screw
  • 4x M3 Anti - loose aluminum alloy nut
Voir plus

Découvrez aussi