Ajouter à la Wishlist
Manufacturer : Speedy Bee / Référence : SB-F4-40A-AIO

F405 40A Bluejay AIO By SpeedyBee

5/5 (2 notifications)
Hors stock
€63.90
Out-of-Stock Notify me when the product is available again

7 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Related products

Technical characteristics

The SpeedyBee F405 40A AIO is 25.5*25.5mm mounting, it includes a F405 flight controller with ICM42688P gyro and the new SPA06-003 barometer.

The 40A ESC supports Bluejay JH-40 firmware, 3-6S LiPo voltage and Dshot600/300 protocols.

This AIO is compatible with both digital and analog VTX systems.

F405 FC

  • MCU : STM32F405
  • Gyro : ICM-42688P
  • USB Port Type : Type-C
  • Barometer : SPA06-003
  • OSD : Supported
  • Bluetooth BLE : Supported, Bluetooth speed enhancement - 2.0
  • Wireless Flight Controller Firmware Update : Supported (no need to press physical BOOT button)
  • Wireless Download & BlackBox Analysis : Not supported
  • DJI Air Unit Connection Method : Supports both 6-pin direct insertion and soldering
  • 6-pin DJI Sky Port Direct Insertion : Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
  • Flash (for BlackBox) : 8MB
  • Betaflight CC Pads (Camera Parameter Adjustment) : Supported
  • Input Voltage : 3S-6S LiPo battery
  • 4V5 Output : Two 4V5 outputs; total current 1A
  • 5V BEC Output : Three 5V outputs; total current 2A; shared with 4V5
  • 9V BEC Output : None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
  • MOTOR : M1-M4
  • UART : 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
  • ESC Telemetry : None
  • I2C : Supported
  • LED Pads : Supported, used to control WS2812 LED lights
  • Buzzer Pads : Supported, BZ+ and BZ- pads
  • BOOT Button : Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
  • RSSI Pads : None
  • SmartPort : Not supported
  • Supported Flight Controller Firmware : BetaFlight (Default), INAV
  • Firmware Target Name : SPEEDYBEE F405AIO
  • Mounting : 25.5 x 25.5mm, 2mm hole diameter
  • Dimensions : 33.0mm (length) x 33.0mm (width) x 8mm (height)
  • Weight : 13.6g (including CNC)

40A ESC

  • Input Voltage : 3-6S LiPo battery
  • Continuous Current : 40A
  • Burst Current : 45A (10s)
  • ESC Protocol : Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.
  • Output Voltage : VBAT battery voltage (used to power the flight controller)
  • Current Sensor : Supported (Scale = 254, Offset = 0)
  • Firmware : Bluejay JH-40 48kHz

Included

  • 1x F405 AIO
  • 1x Soldering practice board
  • 1x DJI air unit 6 pin 80mm connection cable
  • 1x 35V 470uF capacitor
  • 4x M2*6.6mm damper
  • 5x M2 silicone ring
  • 5x M2 nylon hex nut
  • 1x XT30 cable
  • 1x Type-C extension module
  • 1x Power expansion board
  • 1x BEC
  • 2x Heat shrink tube
  • 1x 4pin 80mm cable
  • 4x M2*20mm screw
  • 4x M2*12mm screw
  • 1x 6pin 30mm cable for BEC
  • 2x Capacitor heat shrink tube
  • 1x Manual
Voir plus

Customer reviews

5/5 (2 notifications)
Par le 23/05/2025

Pas encore tester en vol mais de très bonne facture et beaucoup d accessoire fournit avec.

Par le 20/05/2025

i have the aio but i havent used it for now. sorry but i cant say much about it

Découvrez aussi