Manufacturer : DJI / Référence : AR005650
DJI Focus Pro Combo
En stock
€1,649.00
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
Experience intuitive perception with the DJI Focus Pro offering precise focus control.
It is offered in two versions, both consisting of a control handle, a motor and a LiDAR module. The All-In-One Combo version adds a manual control unit.
The DJI Focus Pro accommodates a wide range of shooting scenarios and genres.
Benefit from perfect focus management when your camera is present on a DJI RS 4 or 4 Pro stabilizer for example.
DJI Focus Pro is compatible with DJI RS 4 / DJI RS 4 Pro, DJI RS 3 Pro, DJI Ronin 4D and DJI Inspire 3 stabilizers.
Note: The DJI Focus Pro hand unit must be powered with an NPF-550 type battery (not included)
DJI Focus Pro Handle
- Handle dimensions: approximately 59 x 73 x 162 mm
- Dimensions manual unit: approximately 128 x 87 x 87 mm + battery: 71 x 38.6 x 21.1 mm
- Handle weight: approximately 482 g
- Weight manual unit: approximately 555g (battery excluded)
- Handle autonomy: Approximately 2.5 hours
- Handle voltage: 6.6 to 8.4V
- Handle battery: BHX711-3000-7.2V
- Manual unit battery: NP-F550 (not included)
- Handle screen: Yes, 1.8 inch touch screen
- Manual unit screen: Yes, 1.09 inch touch screen
- Power of the handle transmitter: < 8dBm
- Hand unit transmitter power: < 8dBm
- Connector: USB-C port (DJI Focus Pro LiDAR) / USB-C port (DJI Focus Pro motor) / USB-C port (camera control port) / USB-C port (battery charging port)
- Operating temperature: -20° to 45°C / Manual unit: -20 to 45°C (excluding battery temperature)
- Operating frequency: 2.400 to 2.4835 Ghz / Manual unit: 2.400 to 2.4835 GHz
- Manual unit transmission distance: 100 to 160m
- Charging Methods: Supports 18W PD fast charging
Focus Motor
- Weight: ~123g
- Dimensions: ~100 x 61 x 34 mm
- Max torque : 0.6N-m
- Max speed : 300 rpm
- Operating current: Quiescent current: 60mA (8V); Stall current: 2 A (8V)
- Operating voltage: 6.6 to 17.2V
- Gear: Output gear teeth: 30 / Output gear module: 0.8
- Operating temperature: -20 to 45° C
LiDAR
- Range: 0.5 to 20m
- Number of points captured: 76,800
- Accuracy: +/- 1 to 3% (depending on distance)
- Scanner FOV: Wide-angle mode: 65° (horizontal), 40° (vertical), 76.1° (diagonal) / Telephoto mode: 20° (horizontal), 20° (vertical), 28.3° (diagonal)
- Positioning Systems: Can be mounted directly via Cold Shoe or using the 1/4" thread
- Operating temperature: -20° to 45°C
- Weight: About 140g
- Dimensions: Approximately 68 x 25 x 57 mm
- Ports: Cold Shoe, 1/4"-20 threaded hole, USB Type C ports
- Camera definition: Resolution: 1920 x 1440 pixels / Refresh rate: 30p / Equivalent focal length: 30mm
- Power consumption: On average, approximately 6.3W and maximum 6.8W / Input voltage: 6.6 to 17.2V
DJI Focus Pro Creator Combo
- 1x DJI Focus Pro LiDAR
- 1x DJI Focus Pro Handle
- 1x DJI Focus Pro Motor
- 1x Focus Pro carrying case
DJI Focus Pro All-In-One Combo
- 1x DJI Focus Pro LiDAR
- 1x DJI Focus Pro Handle
- 1x DJI Focus Pro Motor
- 1x DJI Focus Pro Hand Unit
- 1x Focus Pro carrying case
DJI Focus Pro Combo
En stock
€1,649.00