BeeID M10Q GPS Module with RemoteID By NewBeeDrone

Improve your drone's performance with the BeeID M10Q GPS module from NewBeeDrone.

Designed for drones weighing less than 250g, this high-performance module effortlessly meets FAA RemoteID requirements.

With its compact design combining GPS and RemoteID features, the BeeID M10Q offers fast GPS lock, stable connectivity, and versatile compatibility, making it ideal for FPV pilots and professionals who demand reliability and ease of use.

It features a high-gain GPS antenna for faster and more accurate positioning, even in challenging conditions.

IMPORTANT INAV USERS : Please turn off the AUTO-CONFIG setting inside INAV. This setting must be switched off in order for BeeID to function normally.

How to use :

1. Check compatibility
2. Connect the BeeID TX pin to the FC RX pin of the same UART port
3. Connect the BeeID RX pin to the FC TX pin of the same UART port
4. Set the baud rate to 115200bps to match the module's default speed
5. Enable GPS mode on the selected UART port
6. Save and restart your flight controller to apply the changes
7. Verify that the module is correctly acquiring GPS satellites
8. In Betaflight, iNAV, or Ardupilot, check the GPS status page for satellite lock and position updates
9. Ensure that RemoteID broadcast is active and working via BLE. You can use the Drone Scanner app to verify broadcast information