Boxer Crush ELRS Radio By RadioMaster
Related accessories
Technical characteristics
RadioMaster proudly presents the Boxer Crush radio, available in seven colors, each more inspiring than the last.
Equipped with AG01 Hall effect gimbals, this compact and ergonomic radio is perfect for those who want to stand out and mix their flying experience with bright colors.
This Boxer ExpressLRS 2.4G is equipped with a powerful STM32F407VGT6 with 1MB of flash and 192KB of RAM, it has a cooling system, pre-installed EdgeTX firmware, an SD card slot, a removable T antenna and many other features !
Add a touch of personality to your FPV adventures with the Boxer Crush from RadioMaster!
Note : Batteries not included
Be careful, the ‘red’ version tends more towards pastel fuchsia/magenta, take a good look at the colours in the photos.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
- Color: Grey / White / Green / Pink / Red / Blue or Yellow
- Size: 235*178*77mm
- Weight: 617.1g
- Frequency: 2.400GHz-2.480GHz
- Internal RF: ExpressLRS 2.4GHz
- Supported protocols: Module dependent
- Cooling fan: Built-in
- Voltage Range: 6.6-8.4V DC
- Radio Firmware: EdgeTX (Transmitter) / ExpressLRS (RF module)
- Channels: Max 16 channels (Receiver dependent)
- Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
- Display: 128*64 Monochrome LCD display
- Gimbal: AG01 CNC Hall Gimbal
- External module: JR / FrSKY / Crossfire compatible
- Upgrade Method: USB / SD card & EdgeTX Companion PC software
Bullet points
- Wide choice of color
- Gimbal AG01 CNC Hall
- ExpressLRS 2.4G
- Edge TX pre-installed
- Support QC3.0 2.0A max fast charging
- 2S 6200mAh battery compartment
- Built-in cooling fan
- Adjustable and removable T antenna
- Fabric handle
- SD card slot
Included
- 1x Boxer Crush Radio
- 1x Signature Carry Case
- 1x T Antenna
- 1x USB-C Cable
- 1x Gimbal Protector
- 1x 1.5mm Allen Key
- 2x M4*4 Screws
- 4x Low Tension Springs
- 1x 18650 Battery Tray
- 1x Stickers
- 1x Manual