Heat Shrink Tube For 6S 4000mAh 21700 Li-Ion Batteries (1m) By NinjaTech
Related accessories
Anti-Slip Strap 250X16mm (Unit) - DFR
Heat Shrink Tube For 6S 1400mAh LiPo Batteries (1m) - 6cm Diameter By NinjaTech
Heat Shrink Tube For 6S 5000mAh LiPo Batteries (1m) 8.3cm Diameter By NinjaTech
R-Line V5 1200mAh 150C 6S Lipo Battery - XT60 - Tattu
Technical characteristics
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription on it.
Note: The 6S 4000mAh Li-Ion battery in the title is an example of a battery compatible with the format of this heat shrink, others similar to it will also be compatible.
Be sure to check the format of your battery, sizes vary from one supplier to another.
Be careful to maintain a suitable temperature and to dissipate the heat so as not to damage the battery by heating for a long time and very strongly in the same place.
Specifications
- Diameter: 7.3cm (shrink not retracted)
- Flat size: 11.5cm (shrink not retracted)
- Length: 1m
- Thickness : ~0.5mm
Included
- 1x Heat Shrink Tube (1m)
Note : battery not included
Customer reviews
pas encore utilisé ,semble correct
De bonne qualité
Heat Shrink Tube For 6S 4000mAh 21700 Li-Ion Batteries (1m) By NinjaTech