
CineLog30 V3 DJI O4 PRO HD 4S BNF ELRS 2.4G By GEPRC
Related accessories
Technical characteristics
The Cinelog30 V3 is equipped with AIR UNIT O4 PRO VTX, which offers superior image quality with more accurate colors and even finer details thanks to its advanced processing chip.
The frame is reinforced with aluminum for added strength, while the electronics compartment is designed with a wrap-around structure to better protect internal components. Dust caps protect the data ports, and the cover protects the camera from impact. The rear PDB promotes clean wiring and efficient layout.
Powered by TAKER F722 45A 32-bit AIO, 1404 3850KV motors, HQprop DT76mm x3 propellers and a 4S 720mAh LiHV battery, the Cinelog30 V3 achieves up to 8:10 flight time.
Thanks to O4's advanced imaging capabilities, it produces smooth, high-quality cinematographic images.
Specifications
- Frame: GEP-CL30 V3
- Wheelbase: 128mm
- Carbon Fiber Plate Thickness: 2.5mm
- Bottom plate: 1.5mm
- FC system: TAKER F722 45A 32Bit AIO
- MCU: STM32F722RET6
- Gyro: ICM 42688-P
- FC Firmware: GEPRC_F722_AIO
- ESC: 32Bit 45A
- Receiver: ELRS2.4G
- Motor: SPEEDX2 1404 3850KV
- Prop: HQprop DT76mmx3 V2
- Battery Connector: XT30
- VTX: O4 AIR Unit Pro
- Camera: O4
- Antenna: O4 original
- Recommended Battery: LiHV 4S 660mAh-720mAh
- Flight Time: 8’10″
Included
- 1 x Cinelog30 V3
- 1 x Protective Frame
- 2 x HQprop DT76mmx3 V2 (pair)
- 1 x 15*150mm Battery Strap
- 1 x L-shaped Screwdriver 1.5mm
- 1 x Grey Canopy
- 1 x Black Canopy
- 1 x Spare Screw Pack
- 1 x Battery Anti-slip Pad
- 1 x Damping Ball Puncher
- 1 x Frequency Pairing Ejector pin