Ajouter à la Wishlist
Manufacturer : Walksnail / Référence : WN06-8014B

Avatar HD V2 Kit By Walksnail

5/5 (5 notifications)
En stock
€159.90
Type :
Same day shipping

16 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)
Related products

Technical characteristics

This new version of Walksnail's Avatar HD kit uses H.265 code, an industry-leading technology that helps deliver 1080p FPV image quality with ultra-low latency of 22ms.

The V2 camera with 2K pixels and native 4:3 sensor will give you even better image quality while capturing more surrounding scenery while driving.

Now, 20x20mm mounting holes have been added in addition to the 25x25mm ones for even wider compatibility.

The VTX Avatar HD V2 is available with a choice of 8G or 32G of internal storage. The 32G version supports Gyroflow unlike the 8G version.

It can record your 1080p or 720p HD flight videos without any interference.

* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.

VTX V2

  • Model : Avatar V2 module
  • Communication Frequency : 5.725-5.850GHz
  • Transmitter Power (EIRP) : FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
  • 1/O Interface : JST1.0*4(Power in)JST0.8*6(USB)
  • Mounting Holes : 25.5*25.5mm; 20*20mm
  • Dimensions : 33.5*33.5*10.5mm
  • Storage : 8G OR 32G
  • Recording : 1080p/720p
  • Weight : 17.6g
  • Operating Temperature : -20-40℃
  • Channels : 8
  • Wide Power Input : 6V-25.2V
  • Supported FC System : Betaflight; Inav; Fettec; ArduPilot; Kiss
  • OSD : Canvas mode
  • Latency : Average delay 22ms
  • Antenna : 1(IPEX)

Camera V2

  • Model : Avatar V2 camera
  • Image Sensor : 1/3.2-Inch 4Mp 4:3sensor
  • Resolution : 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
  • Ratio : 4:3 native /16:9
  • Lens : 2.1mm
  • FOV : 160°
  • Aperture : F2.0
  • Shutter : Rolling shutter
  • Min.Illumination : 0.001Lux
  • Weight : 7.2g
  • Dimensions : 19*19*22mm
  • Coaxial Cable : 140mm
  • Gyroflow : supported / non-supported, two version

Antenna

  • Polarization : LHCP
  • Bandwidth : 5600MHz-6000MHz
  • Gain : 1.9dBi
  • VSWR : ≤1.5
  • Input Impedance : 50Ω
  • Interface : IPEX-1
  • Size : R15 X 45mm (without cable）
  • Weight : 2g

Included

  • 1x Avatar HD V2 VTX
  • 1x Camera V2 (19*19mm)
  • 1x Antenna
  • 1x USB transfer extension cable
  • 1x 4pin silicone cable
  • 8x M2*4mm screw
  • 4x M2*5mm screw
  • 4x M2*6mm screw
  • 4x M2*14mm screw
  • 4x M2*5*0.5mm gasket
Voir plus

Customer reviews

5/5 (5 notifications)
Par le 12/04/2024

Good

Par le 31/05/2023

All good.

Par le 22/05/2023

parfait

Par le 13/05/2023

Envío súper rápido, falta probarlo pero en principio todo ok

Par le 15/04/2023

Fonctionne parfaitement. Très belle image. Plus and play.

Découvrez aussi

Avatar HD V2 Kit By Walksnail Avatar HD V2 Kit By Walksnail
5/5 (5 notifications)
En stock
€159.90