Avatar HD Moonlight Kit By Walksnail
Related accessories
ND Filter For Moonlight Camera (Unit) By Walksnail
Patch Antenna V2 For Avatar Goggles X By Walksnail
Redbird Antenna V2 For Avatar Goggles X By Walksnail
Gofilm 20 Walksnail Moonlight HD 4S BNF ELRS 2.4G By Caddx
Technical characteristics
Always more attentive to the community of FPV pilots, Walksnail presents its new premium kit!
With the Avatar HD Moonlight kit, you no longer need your GoPro!
Enjoy recording up to 4K at 60FPS with perfect image quality with this Moonlight FPV camera featuring a Starlight sensor and a 160° field of view.
In addition to its significant qualities, the kit includes silicone pads for each side of the camera to limit vibrations in flight as well as an ND8 filter that simply clips onto the lens.
In addition, there is a built-in electronic image stabilization (EIS) for even better rendering.
Compatible with Gyroflow, the Moonlight kit consists of the VTX with 20x20 or 25.5x25.5mm (M2) mounting, two Avatar HD V2 antennas for reliable transmission with a latency of less than 22ms and the micro camera.
* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV-Racer cannot be engaged for any use of this material without an adequate license.
licence adéquate.
Moonlight Kit
- Model : Moonlight kit
- Firmware name : AvatarMoonlight_Sky_X.X.X
- Communication Frequency : 5.725-5.850GHz
- Transmitter Power (EIRP) : FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
- 1/O Interface : JST1.0*4(Power in)JST0.8*6(USB)，Micro SD card Slot；IPEX-1
- Sensor : Starlight sensor
- FOV : Max 160°
- Aperture : F2.1
- Shutter : Rolling shutter
- ISO : 100-25600
- Recording resolution : 4K@30/60fps,2.7K@30/60fps,1080p@100/60fps,720p@60fps
- Max Mbps : 150Mbps
- Video format : MP4 (H.264)
- 3D DNR : Support
- Gyroflow : Support
- Built-in EIS : Support
- Wide Power Input : 7.4V-25.2V
- Power consumption : [email protected], [email protected]
- Memory card type : U3 MicroSD, Max 256G
- Camera size : 19.6mm*19mm*24mm
- VTX size : 15.3mm*34.5mm*34.5mm
- VTX Installation hole distance : 20*20mm/25*25mm (M2)
- Weight : 38.5g(Antenna not included)
- OSD : Canvas mode
- Latency : Average delay 22ms
- Antenna : 2 (IPEX)
Antennas
- Model : Avatar V2
- Polarization : LHCP
- Frequency range : 5600MHz-6000MHz
- Gain : 1.9dBi
- VSWR : ≤1.5
- Input Impedance : 50Ω
- Interface : IPEX-1
- Size : R15 X 45mm(without cable)
- Weight : 2g
Included
- 1x Moonlight Avatar HD kit
- 2x Avatar HD V2 antenna
- 1x ND8 filter
- 1x Set of screws
- 1x Set of cables
OR
- 1x Moonlight camera
- 1x Coaxial cable (25mm)
- 1x Set of cables
Customer reviews
parfait
câble mipi un peu court (dans un speedybee master 2 hd). antennes super difficiles à installer. mise à jour du module enregistrement avec un câble additionnel un peu pénible. matériel de qualité cependant, a priori.
