Manufacturer : AOS RC / Référence : *(DISC)F013228
AOS 5" V2 HD 6S Vista Nebula Pro BNF By AOS RC
En stock
€649.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
Chris Rosser's famous AOS frame is designed for freestyle, extremely light and with perfect flight performance, the AOS 5" V2 is at the cutting edge of technology.
This 5" BNF is equipped with the Caddx Vista Nebula pro system, XING2 2207 motors and a BMI270 gyro.
Bullet points
- 32x32mm GoPro mounting holes in top plate with installed press-nuts
- Designed for up to 5.1 inch props, no props in view
- Recommended 1000-1300mAh 6S battery
- ~350g without battery
- Captive battery straps
- 220mm wheelbase
- 6 mm Arms
Blitz mini F7 V1.1 FC
- Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
- Smartaudio / IRC Tramp VTX protocol supported
- Firmware target: IFRC-IFLIGHT_BLITZ_F722
- Motor outputs: 4x (SH1.0 connector)
- Flash: 16MB (Blackbox flash)
- I2C serial: SDA / SLA pads
- Dimensions: 30.5x27 mm
- MCU: STM32 F722
- Barometer: DPS310
- OSD Chip: AT7456
- LED controller: Yes
- Beeper pad: Yes
- Gyro: BMI270
- Weight: 5g
- UARTS: 6
Blitz mini 55A ESC
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Mounting Holes: 20*20mm/Φ4mm
- Target: IFLIGHT_BLITZ_G2
- Supports 2-6S lipo input
- Dimension: 35*42mm
- Current sensor: Yes
- Firmware: BLHeli 32
- Constant: 55 Amps
- Current rate: 100
- BlackBox: 16MB
- Burst: 60 Amps
- Weight: 11.3g
- MCU:G071
- BEC: NO
Included
- 4x Nazgul F5 - CW propeller + 4 x Nazgul F5 CCW (Grey)
- 1x Albatross LHCP 5.8GHz SMA FPV Antenna 75mm
- 1x Pre-built and Tested AOS 5 V2 HD BNF
- 1x iFlight Lipo Strap 20*250mm (Black)
- 1x iFlight Lipo Strap 15*250mm (Black)
- 1x Nebula Pro Vista HD System
Découvrez aussi
AOS 5" V2 HD 6S Vista Nebula Pro BNF By AOS RC
En stock
€649.90