Manufacturer : BETAFPV / Référence : 01010041_2
Pavo20 Pro Brushless Whoop BNF Crossfire (No VTX) By BetaFPV
Hors stock
€179.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
The Pavo20 Pro is an ideal choice for beginners in FPV. Compatible with the DJI O3 air unit, this 2.2" cinewhoop weighing less than 150g was designed for freestyle shooting.
The BNF consists of Gemfan 2218 3-blade propellers, LAVA 1104 7200KV brushless motors, an AIO F4 20A and a TBS Crossfire receiver.
You have the choice of installing a DJI O3 VTX, a Caddx Vista series VTX or the Runcam Link.
Equipped with an XT30 connector, it is recommended to connect a 3S 450-550-650mAh 75C battery to take full advantage of the Pavo20 Pro and its flight autonomy of up to 6'40".
Note :
- This whoop does NOT include the VTX system.
- The actual flight time depends on the flight environment and flight mode.
- Please correctly connect the battery's positive and negative terminals to prevent drone damage
Bullet points
- Compatible DJI O3
- Cinewhoop 2.2"
- Less than 150g
- Ideal for beginners in FPV
Specifications
- Wheelbase: 93.7mm
- Weight(Without Battery, Air Unit): 66.3g
- Support VTX: DJI O3 Air Unit, Caddx Vista Kit, RunCam Link
- Support Cam: DJI O3 Cam, Caddx Series, RunCam Series 19mm/20mm
- Camera Filter Installation: Vertical
- Battery Connector: XT30
- Battery Slot: 20mm*Unlimited Height
- Recommend Battery (not included) : LAVA 3S 450mAh 75C Battery, LAVA 3S 550mAh 75C Battery, 3S 650mAh Battery
- FC: F4 2-3S 20A AIO FC V1
- Motor: LAVA Series 1104 | 7200KV Brushless Motors
- Props: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
- Flight Time: 6'40'' (LAVA Series 3S 550mAh Battery)
- RX Version: TBS Crossfire
Included
- 1x Pavo20 Pro Brushless Whoop Quadcopter
- 1x Pavo20 Pro HD VTX Bracket
- 1x HD VTX Bracket Screw Package
- 1x Pavo Series COB LED Strip Accessory Kit (Ice Blue)
- 4x Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
- 1x PCBA | Type-C Adapter Board
- 1x 4Pin Adapter Cable
Note : VTX system not included