Manufacturer : GEPRC / Référence : GP105640
CineLog20 DJI O3 HD 4S BNF ELRS 2.4G By GEPRC
Hors stock
€556.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
Discover the experience and evolution of GEPRC with the new CineLog20, a concentrate of the best performances!
This 2" cinewhoop is equipped with DJI O3 Air Unit, F411 35A AIO, an ExpressLRS 2.4GHz receiver and GR1303.5 5500KV motors.
This HD drone is perfect for indoor shooting.
Silent and long flight time, the CineLog20 can accommodate naked action cameras such as GP 8/9/10/11, Action2, insta360 Go2 or Peanut...
Specifications
- Frame: GEP-CL20
- Wheelbase: 100mm
- Gimbal plate: 2.0mm
- Top plate: 2.5mm
- Bottom plate: 1.5mm
- FC system: GEP-F411-35A AIO
- MCU: STM32F411CEU6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E chip
- ESC: 8Bit 35A
- VTX: O3 AIR Unit
- Camera: O3 Camera
- Antenna: 5.8G&2.4G
- Motor: GR1303.5 5500KV
- Propeller: EMAX Avan Micro 2×2.4×4
- Receiver: ExpressLRS 2.4G
- Recommended battery (not included) : LiHv 4S 450mah-660mah
- Flight time:4-6min
Included
- 1x CineLog20 HD O3
- 2x 2 inch propellers (pairs)
- 1x Naked GP Camera Base
- 2x M15*150mm battery strap
- 2x Battery Silicone Pads
- 2x EVA landing Pads
- 1x Set of screws
- 1x L-shaped screwdriver (1.5mm)
- 1x Antenna fixed tube
- 1x 4S Naked GP Camera power cable (with balanced terminal head)
- 2x EVA damping rings of guards
- 1x TBS Antenna mount (Vertical Type)
- 1x TBS Antenna mount (Horizontal Type)
- 1x TBS Antenna printed parts
- 3x M2*12mm cup head screws
- 2x M2*5mm round head screws
- 1x M2*8mm round head screw with pad
- 3x M2*7mm round head screws
- 2x M2*8mm round head screws
- 2x M2 iron nuts
- 1x self-clinching nut
Découvrez aussi
