Skystars - F7 WIFI + KO45 3-6S BLHeli_32
Related accessories
Technical characteristics
The SkyStars F7+ KO45 Blheli_32 Fly Tower Stack features the SkyStars F7 HD flight controller, as well as the KO45 45A 4-in-1 ESC to give your multirotor full power!
Features
Excellent over-current capability
By adopting the best PCB material and PCB production process. Such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with a 6-layer layout design of the board, compared with others that commonly use 4 layers, allowing it to withstand higher current.
Extreme stability and support of 6S LiPo battery
By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & electronics imported from USA and Japan. Plus advanced lead-free SMT Processing technology. It makes ESC fully support the 6s battery and get better performance.
Better Control Performance
Flashed with the latest BLHeli_32 firmware in factory, support telemetry functions (including voltage, RPMS, & current )
Specification FC
- MCU: STM32F722RGT6 216MHz
- Gyro : BMI270
- OSD: Betaflight OSD & DJI HD OSD (UART6)
- BEC Output: 5V 3A & 10V 3A
- Input Voltage: 3-6S Lipo
- Blackbox: 8MB
- Firmware: SKYSTARS F7HD
- 6 hardware UARTS (UART1,2,3,4,6)
- Dimensions: 38.5x40x6.2mm
- Mounting Holes: Standard 30.5mm square to the center of holes
- Weight: 6.2g
Specification ESC
- Dimension: 41*46mm
- Mounting Holes: 30.5*30.5mm/¦µ3mm
- Weight:13.3g
- Supports 3-6S Lipo input
- BB21 MCU, 48Mhz Runs BLHELI 16.X Firmware
- Current sensor: YES
- BEC: NO
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Target: Q-H-30 BLS 16.7
- MOS tube model is QN3019M6
Included
- 1x SkyStars F7 F722 Flight Controller
- 1x SkyStars RC KO45 45A BLHELI_32 4-in-1 30X30 ESC
Download
Customer reviews
Facile à monter et rapide
Très bonne carte pour un drone école. Je pense qu'on peut facilement la monter en nervosité. Mais pour mes élèves je vais attendre un peu !
