Matek PDB FCHUB-12S 440A - BEC 5/12V
Matek PDB FCHUB-12S 440A - BEC 5/12V
Matek PDB FCHUB-12S 440A - BEC 5/12V
Manufacturer : Matek / Référence : MATEK-PDB-FCHUB-12S

Matek PDB FCHUB-12S 440A - BEC 5/12V

Hors stock
€24.92
3 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Caractéristiques techniques

Matek FCHUB-12S 440A PDB with 5 / 12V BEC, connector for FC MATEK FC 405-OSD or the F722-STD and Current sensor. Can support up to 440 amperes!

PDB

  • Input voltage range: 8~60V (3~12S LiPo)
  • 4x70A cont, 4x110A burst
  • 4x ESC power /signal/ telemetry pads
  • Current Senor: 440A,  3.3V ADC,  Scale 75
  • 2x LED indicators for 5V, 12V

FFC connection

  • Compatible with MATEKSYS FC F405-STD, F722-STD
  • VTX: Video Transmitter signal
  • T5 & R5: TX5 and RX5 of F405-STD/F722-STD

BEC 5V output (5V pad)

  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current 5 Amps,  Max.6A
  • Short-circuit tolerant (2 seconds)
  • Overcurrent protection & self-recovery

BEC 12V output (12V pad)

  • Voltage: 12.0 +/- 0.2VDC (Input voltage >=12V)
  • Continuous current 4 Amps,  Max.5A
  • Input voltage<12V,  Output voltage = Input voltage
  • Probably there is audible sound in the BEC12V inductor when Input voltage<12V
  • Short-circuit tolerant (2 seconds)
  • Overcurrent protection & self-recovery

Switchable 12V output (SW12V pad)

  • 12V ON/OFF can be switched via PINIO
  • can be use for powering VTX,LED etc.

BEC 3.3V output

  • Linear Regulator
  • Continuous current: 500mA

Physical

  • Mounting: 30.5 x 30.5mm, Φ3mm
  • Dimensions: 55 x 50 x 6 mm
  • Weight: 21g
Voir plus