Matek GPS Can-Bus M8Q-CAN - UAVCAN
Matek GPS Can-Bus M8Q-CAN - UAVCAN
Matek GPS Can-Bus M8Q-CAN - UAVCAN
Matek GPS Can-Bus M8Q-CAN - UAVCAN
Manufacturer : Matek / Référence : M8Q-CAN

Matek GPS Can-Bus M8Q-CAN - UAVCAN

En stock
€46.58

5 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Caractéristiques techniques

Specifications

  • ArduPilot AP_Periph F303 CAN node
  • GPS SAM-M8Q (GPS, GLONASS, Galileo)
  • Magnetic Compass QMC5883L
  • Barometer DPS310
  • UART1, Firmware update
  • UART2, onboard GPS
  • UART3, MSP Protocol (To be supported)
  • CAN, UAVCAN Protocol
  • I2C, onboard QMC5883L & DPS310
  • I2C JST-GH connector, external AirSpeed sensor
  • CAN bootloader LED, Blue
  • Fast blinking, No communication between CAN node and Flight Controllers
  • Slow blinking, Communicating between CAN node and Flight Controllers
  • GPS PPS LED, Green
  • blinking(1Hz) when GPS has 3D fixed
  • Boot button
  • Input voltage range: 4~6V
  • Power consumption: 100mA
  • Operating Temperatures: -20~80 °C
  • Size : 29mm*29mm*9.7mm
  • Weight : 11.3g

Included

  • 1 x Matek GPS M8Q-CAN - UAVCAN
  • 2x JST-GH-4P to JST-GH-4P 20cm silicon wire

Tips

  • u-blox M8Q series has no external flash memory
  • Compass Alignment(Arrow forward and flat mounting):
  • Ardupilot/Mission Planner: Rotation None
  • Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
  • The scratches on ceramic antenna are the result of tuning the antenna by ublox.
  • UART3 MSP Protocol is not implemented for now.