Matek Flight Controller F722-SE
Matek Flight Controller F722-SE
Matek Flight Controller F722-SE
Matek Flight Controller F722-SE
Matek Flight Controller F722-SE
Manufacturer : Matek / Référence : MATEK-F722-SE

Matek Flight Controller F722-SE

€47.42
5 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Caractéristiques techniques

Matek Flight Controller/PDB F722-SE

Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.

FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • Baro: DPS310 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: MicroSD card slot (SPI)
  • 5x Uarts (1,2,3,4,6) with build-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
  • 4x individual ESC power/signal pads
  • 1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

PDB Specifications

  • Input: 6~36V (3~8S LiPo) w/TVS protection
  • PDB: 4x35A (Max.4x46A)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Current Sensor 184A (Scale 179)
  • Battery Voltage Sensor: 1:10 (Scale 110)

FC Firmware

  • BetaFlight / INAV
  • Target: MATEKF722SE

Physical

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions:  36 x 46 mm
  • Weight: 10g

Including

  • 1x FC F722-SE
  • 6x silicon grommets M4 to M3
  • 1x FR4 PCB Plate 36*36*1mm
  • 1x Rubycon ZLH 35V/470uF (Low ESR)

Drivers & Softwares

BetaFlight

FC Firmware for DPS310

CLI “set telemetry_inversion = ON”  for Frsky SmartPort working on TX pin directly.

If FC can’t be connected to INAV configurator after flashing, unstall COM port driver, then install folowing driver for WIN10X64

Voir plus

Customer reviews

4.9/5 (8 notifications)
Par le 03/06/2020

Plus que satisfait car en terme de FC c'est le Top !

Par le 22/03/2020

Super carte de vol pour inav,je recommande

Par le 21/11/2019

Super matos

Par le 07/09/2019

Idem

Par le 28/08/2019

Un peu grande, mais tout est là .

Par le 19/08/2019

havent tested it yet

Par le 21/05/2019

Très bon FC AIO, nombreux UART dispo, permet de switcher entre 2 caméra pour faire un cheat kwad ! et permet de switcher l'alimentation du VTX.

Par le 24/04/2019

....