Matek Flight Controller F722-Mini

Matek

MATEK-F722-MINI

Immense power in a small package! Matek has added another member to their line of mini 20x20mm flight controllers; the F722-Mini with dual gyros, VTX power switch, and on board blackbox. This will fit great in your micro sized 2" and 3" builds or any ultralight 5" and 6" builds. 

Learn more

By buying this product you can collect up to 4 loyalty points. Your cart will total 4 loyalty points that can be converted into a voucher of 0,80 €.

Same Day Shipping

49,90 €

  • Degressive Shipping Costs

  • Same day shipping for orders placed before 3:30 pm (Monday to Friday)

More info

Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.

FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • OSD: AT7456E (SPI)
  • Blackbox: 32M-byte Flash memory (SPI)
  • Baro: No barometer built-in.  support external barometer module (I2C)
  • 5x Uarts (1,2,3,4,6) with build-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Convertible 20mm to 30.5mm mounting
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

Power

  • Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in, supports external current sensor of PDB/4in1

FC Firmware

  • BetaFlight / INAV
  • Target: MATEKF722SE

Physical

  • Mounting
    • 20 x 20mm/Φ3mm with Silicon Grommets
    • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
    • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
  • Dimensions:  28 x 28 mm
  • Weight: 5g

Including

  • 1x FC F722-mini
  • 1x 20mm to 30.5mm conversion plate
  • 6x Silicon grommets M4 to M3
  • 6x Brass grommets M3 to M2
  • 1x SH1.0_8pin cable 5cm
  • 2x SH1.0_8pin connectors

Data sheet
Avis produits
  • Par D. Bryan
  • the 21/05/2019
This fc proved itself on my other Xclass quad, so never change a working concept
  • Par S. Teddy
  • the 23/04/2019
Magnifique. Permet un montage ultra propre. FC top!!!

Shipping Cost

Degressive shipping cost

Express delivery with DHL

For order placed before 3:30PM

téléchargement.png

Customer Service

An advice ? A question ?
call us at +339-72-61-23-57
Monday to Friday from 09h30 to 12h00 and from 13h30 to 17h30

Newsletter