Lethal Conception - SR-5 Hybrid
The SR-5 Hybrid is a versatile 5 inches stretch frame, designed for race and Freestyle.
Made by Lethal Conception.
New Version with strengthened arms !
Assembling Instruction here.
By buying this product you can collect up to 5 loyalty points. Your cart will total 5 loyalty points that can be converted into a voucher of 1,00 €.
Same day shipping ! Warning: Last items in stock!
Degressive Shipping Costs
Same day shipping for orders placed before 3:30 pm (Monday to Friday)
- Lethal Conception -Spoiler
- Rail for SR-5 from 20° to 45° - TPU by DFR
- SR-5 Immortal T and AXII Mount - TPU by DFR
- Lethal Conception - SR-5 Top Plate
- Lethal Conception - SR-5 Bottom Plate
- Lethal Conception - SR-5 Spoiler Mount
- Lethal Conception - SR-5 Camera Mount
- Lethal Conception - SR-5 Pigtail Mount
- Lethal Conception - SR-5 Antenna Mount
- Lethal Conception - 7" Endurance Kit for SR-5 / SR-7
- Lethal Conception - 7" arm for SR-5 / SR-7 - Unit
- Out of stockLethal Conception - Twin arms V2 for SR-5
- Stickers for SR-5 Hybrid frame
It's not a secret anymore!
There is a very good reason most of the fast racers including the current 2018 MGP Champion are running Hybrid setup.
It is the perfect setup that gets rid of the dirty air to the rear props and provides amazing cornering.
The SR-5 V2 Lethal Conception has been designed to offer better performances at the better price.
It is agile, precise and above all extremely efficient.
It has two different FC spacing; 30.5x30.5 et 20x20.
The installation of the battery is multiple. You can put it above, below or even across the frame with the new Lipo Pads.
Countersunk screws will fit perfectly in the carbon to have a smooth appearence and not damage Lipos.
Its stretched geometry improves a better response in roll axis and absorbs movements on the pitch.
The use of T300 carbon "Full Layer" (100% carbon layers) gives it an incredible rigidity and robustness.
The SR-5 by Lethal Conception allow motor patern 16x16 and 16x19mm
- 220mm Stretch Chamfered Frame
- Chamfered carbon arm 4mm T300 full layer
- Chamfered Bottom plate 3mm T300 full layer
- Chamfered Top plate 2mm T300 full layer
- TPU camera mount
- TPU pigtail mount
- Internal height : 24mm
- only 76g
- 1 x Bottom plate 3mm
- 1 x Top plate 2mm
- 2 x Twins arms 4mm
- 1 x TPU RX antenna mount
- 1 x TPU pigtail mount
- 1 x Bottom Lipo pad
- 1 x Top Lipo Pad
- 4 x Spacer Soft Mount
- 4 x 20mm alu spacer
- 4 x 6mm nylon spacer
- 4 x Nylon screw
- 5 x Nylon nut
- 4 x Insert nut
- 4 x M3x10
- 8 x M3x6
- 4 x M3x16
- 9 x M3x8
- FC : 30x30 or 20x20
- ESC: 4in1 or Single on arms
- Camera: Micro Type with M8 Lens
- VTX : TBS Unify Pro HV or HV Race or Tramp
- Antenne: AXII stub
- Motors pattern : 16x16 or 16x19