Kakute F4 V2 & ATLATL HV & Tekko 32 Combo



The Kakute F4 V2 Combo coupled with the powerful Tekko32 4in1 ESC with the BLHELI32 firmware and the ATLATL HV VTX

Learn more

By buying this product you can collect up to 10 loyalty points. Your cart will total 10 loyalty points that can be converted into a voucher of 2,00 €.

Same Day Shipping

105,00 €

  • Degressive Shipping Costs

  • Same day shipping for orders placed before 3:30 pm (Monday to Friday)

More info

Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.

ESC Features

  • 4in1 ESC with 30.5x30.5mm mounting holes, supports DSHOT 1200, BLHELI32 firmware
  • On this version added more CAPS to reduce power noise
  • 32bit ESC with BLHELI32 firmware
  • 4PWM input
  • Voltage output (VBAT), ESC Telemetry(TELEM)
  • Supports Oneshot / Multishot / Dshot PWM
  • Supports damped light
  • NO BEC
  • Supports 3-6S lipo input 
  • 35A continuous current, 50A burst 
  • Mounting holes 30.5x30.5mm 
  • Size: 55*40*6.4mm 
  • Weight: 17g 

Kakute F4 V2 Specs

  • MCU: STM32F405RGT6 32-bit processor 
  • IMU: ICM20689 (SPI) 
  • Barometer: BMP280 
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 
  • 5 hardware UARTS (UART1,3,4, 5, 6) 
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported 
  • 128 Mbit Dataflash chip for Blackbox logging 
  • Dimensions: 35x43x7mm (includes USB in height) 
  • Mounting Holes: Standard 30.5mm square to center of holes  
  • Weight: 7g 

Specifications Of Atlatl HV

  • Output Power: 0.5 mW (pit mode), 25 mW, 100 mW, 200 mW, 400 mW, 600 mW
  • Audio: 6 MHz + 6.5 MHz Mono
  • Antenna Connector: MMCX
  • Input Voltage: 7 to 42 volts (2-6S LiPo)
  • Dimensions: 35x35x7mm
  • Mounting Holes: Standard 30.5mm square to center of holes 
  • Weight: 10.8g

Package Includes

  • 1 * Kakute F4 V2
  • 1* Tekko32 4in1 ESC board 
  • 1* 24mm 8pin to 8pin 1mm pitch cable 
  • 1* Atlatl HV

Data sheet
Avis produits
  • Par S. Jean michel
  • the 21/05/2019
Très bon produit
  • Par L. Jerome
  • the 10/07/2018
combo très bien conçu , pas encore tester tous le combo . À l'air de bonne qualité.
  • Par M. David
  • the 16/05/2018
Excellent combot, bien pensé. Facile à installer, tout fonctionne en symbiose. Le gain en stabilité / précision par rapport à une SPracing F3 est visible.
  • Par '. Nico
  • the 13/05/2018
Ca va

Shipping Cost

Degressive shipping cost

Express delivery with DHL

For order placed before 3:30PM


Customer Service

An advice ? A question ?
call us at +339-72-61-23-57
Monday to Friday from 09h30 to 12h00 and from 13h30 to 17h30