Manufacturer : Iflight / Référence : B009432

Iflight - Beast STD F7 45A AIO 30.5x30.5

Hors stock
€89.08
9 points loyalty thanks to this product

Thanks to our loyalty program, you collect 1 point with each 10 euros you spend. The points will be collected in your personal account. 1 loyalty point will count for your voucher as 0.2 euros.

Shipping costs from 49€ pour France
Same day shipping for orders placed before 3:30pm (Monday to Friday)

Related accessories

Caractéristiques techniques

The Beast STD F7 45A AIO is the new innovation of Iflight. A future-proof all-in-one to step up the game.

Solder the motor wires and you are ready to take off!

Safety reminder :

The DJI plug & play port does not have a voltage regulator (BEC) and goes through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). Make sure not to plug in your DJI Air Unit directly when flying in 6S, as it will fry it! The BEC to add for your 6S build can be found here: https://shop.iflight-rc.com/index.php?route=product/product&product_id=747

Small 4S motor builds should generally need an additional capacitor of at least 16V / 220uF, for 6S go up to 35V or even 50V. Bigger motors have greater current draw, higher voltage spikes, and more severe EMC (motor braking, works like a generator). Make sure to add big enough or even bigger ESR capacitors on the AIO battery pack or on your battery cable, the more aggressive motors you drive. There's a choice of capacitors in the package, but it's never a bad idea to make sure your board is protected. Smaller cards have less capacitance which needs to be covered with external capacitors, there is no way around.

* The barometer can only be used with Betaflight 4.3.0 and higher!

Iflight Beast STD F7 45A AIO Wiring Diagram

Features

  • Vista digital system Plug-and-Play (VBAT passthrough)
  • MCU: BGA-STM32F745, 216MHz
  • Build-in QMC5883 
  • OSD: AT7456E
  • Gyro: MPU6000
  • Blackbox: 125MB Onboard Flash
  • BEC output: 5V 2.5A / 10V 2.5A
  • Barometer: DPS310

Specifications

FC // Beast STD F7 AIO

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • Blackbox: 125MB Onboard Flash
  • BEC output: 5V 2.5A / 10V 2.5A
  • Uarts: 5
  • Barometer: DPS310
  • Connector: Micro-USB
  • OSD: IFLIGHT OSD (AT745E)
  • FC Firmware:IFLIGHT_F745_AIO 4.2.4
  • Compass: QMC5883
  • Mounting pattern: 30.5*30.5mm φ4mm
  • Dimensions: 37.5*44mm
  • Weight: 12.2g

 

ESC // 45A 2-6S

  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 100
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-32
  • Telemetry: no
  • ESC Firmware: IFLIGHT_G071_4IN1

Included

  • 1x Beast STD F7 AIO
  • 2x Capacitor 470uF/35V
  • 1x XT60 16AWG cable 100mm
  • 4x M3 silicon grommets
  • 8x M3*14mm screws
  • 8x M3 Transparent Nylon Nut
  • 8x 0.8mm black Heat shrink tube 10mm
Voir plus