Manufacturer : Happymodel / Référence : 2D20015
Happymodel - Diamond F4 Flight Controller AIO SPI FrSky
Hors stock
€73.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
The Diamond F4 AIO 5in1 flight controller has VTX, ESC, OSD and receiver. This is the flight controller included on the Moblite7 from Happymodel.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Features
- Diamond Mounting Pattern - 22.2x22.2x32.7mm
- Built-in 5V/1A BEC
- Built-in SPI Frsky Receiver
- Built-in Betaflight OSD (SPI Control)
- Built-in 5A Blheli_S 4in1 ESC, Dshot600 ready
- Built-in 25-200mW 5.8GHz VTX
Flight Controller
- (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000 (SPI connection)
- Original whoop size compatible
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI Frsky/Flysky receiver
- Built-in 5V 1A BEC
ESC 4in1
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_8.HEX
- Default protocol: DSHOT600
FrSky SPI D8 Receiver
- SPI BUS receiver Frsky D8 compatible
- Compatible Non-EU transmitter D8 model Channels: 8ch
- Failsafe support
- No ground interference (Transmitter and receiver 1 m from the ground): 200m~300m
VTX
- Output power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz - Smart audio ready
Included
- 1x HappyModel DiamondF4 FR AIO 5in1 Flight Controller - SPI Frsky
- 2x Connecting Wire
- 4x Damping Balls
- 4x Screws