Manufacturer : Speedy Bee / Référence : SB-F745-35A-AIO
F745 35A BLS 25.5x25.5 AIO By SpeedyBee
En stock
€144.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
Discover the first wireless AIO!
This F745 35A AIO is equipped with MPU6000 gyro, BMP280 baro, 8MB blackbox and supports BLHeli_S.
FC
- MCU : STM32F745
- IMU(Gyro) : MPU6000
- USB Connection : Need to solder a USB TYPE-C module to D+,D-,GND pads.
- Barometer : BMP280
- OSD : Supported
- BLE Bluetooth : Supported. Used for parameter configuration
- Flash FC Firmware Wirelessly : Supported
- Download/Analyze Blackbox : Supported
- DJI Air Unit 6-pin Connector : Built-in.
- Flash(for BlackBox) : 8MB
- Current Sensor : Supported. Scale=256
- BetaFlight Camera Control Pad : Yes(CC pad)
- 5V Output : 4 groups of 5V output. The total current load is 2.5A.
- 9V Output : None
- ESC Signal Pads : M1 - M4
- UART : Full UART * 4(UART1, UART2, UART3,UART4)
- ESC Telemetry UART : None
- I2C : Supported.
- LED Pad : Used for WS2812 LED
- Buzzer : BZ+ and BZ- pad used for 5V Buzzer
- BOOT Button : Used to enter DFU mode
- RSSI Input : Not supported
- SmartPort : Use any TX pad of UART for the SmartPort feature.
- Supported Flight Controller : BetaFlight(Default)
- Firmware Target Name : SPEEDYBEE F745AIO
ESC
- Power Input : 3-6S LiPo
- Continuous Current : 35A * 4
- Burst Current : 45A(5seconds)
- ESC Protocol : DSHOT300/600
- Power Output : VBAT
- Current Sensor : Supported(Sacle=256)
- Firmware : BLHeli_S JH40
Included
- 1x F745 35A BLS AIO
- 1x 35V 470uF capacitor
- 1x 6pin DJI Air Unit cable
- 1x External USB Port module
- 5x M2*12mm screw
- 5x M2*6.6mm anti-vibration silicone grommet
- 5x M2 silicone o-ring
- 5x M2 nylon hex nut
- 1x Manual