The SkyStars F722 HD + KM60 stack includes an F722 HD 30x30 flight controller along with a KM60A 32Bit 3-6S 4in1 ESC to give your quad all the power it needs.
FC Specifications
MCU: STM32F722RGT6 216MHz
Gyroscope: BMI270
Baro:Bmp280
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
Input voltage: 3-6S
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.250mA
BetaFlight firmware: SKYSTARSF722Pro
INAV firmware:SKYSTARSF722HD
Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
External size 39mm × 39mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.
ESC Specifications
Input voltage: 3-6S LiPo(11.1V~25V)
Con.Current: 60A
Peak Current: 80A≥ 10S
Firmware: BLHeli_32
Support : Dshot 300/600/1200
Mounting hole : 30.5mm/M3
BEC: No
Product size: 41*46*7.6mm
Weight: 18g
Included
1x SKYSTARS F722HD Flight Controller
1x KM60 60A Brushless 4IN1 ESC
1x 8pin sh1.0
1x Rubycon Hight Frequency 560uF/35V
1x Amass XT60 and wire
4x Silica gel shock absorber
4x 12.9 M3X30 Screw
4x M3 Anti - loose aluminum alloy nut
Voir plus
Customer reviews
4.3/5(3 notifications)
Par Z. Stefano le 21/09/2023
Okok
Par A. Anonymous le 29/05/2022
Bonne qualité du produit, pad de soudures assez large pour ne pas se planter 😌