Manufacturer : Zeez Design / Référence : ZE0007
F7 3030 V3 Flight Controller By Zeez
En stock
€74.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
The Zeez F7 30x30 V3 flight controller DJI compatible uses a powerful F7 processor as well as high quality components such as the ICM42688P gyro or the BMP388 barometer.
A second connector is integrated there in order to bring a second ESC to make building X8's as simple as possible.
Bullet points
- 8 Motor Output
- Uses a powerful F7 processor along with top-of-the-line hardware
- Comes with spaces and pads for TBS Crossfire and TBS Unify Nano32
- 5 UARTS available
- DJI HD System Read
Specifications
- Mounting holes: 30.5x30.5mm
- LiPo Power input: 3S-6S
- 8 Motor output
- BEC 5V-3A / 9V-3A
- STM32F722 MCU (216MHz max frequency)
- ICM42688P Gyro/ACC
- BMP388 Barometer
- OSD chip Onboard
- 5 available UARTs / I2C bus
- SD Card Reader
- HD Plug for DJI Air Unit or Caddx Vista or Walksnail VTX
- USB Type C connector
- Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation
Included
- 1x Zeez RC F7 3030 Flight Controller V3
- 4x Aluminum Standoff
- 4x Aluminum Nut
- 1x ESC to Flight Controller 8 Pin to 8 Pin JST SH 1mm Connector
- 1x ESC to Flight Controller 8 Pin to Free Wires (with JST SH crimp)
- 1x 2nd ESC to Flight Controller 5 Pin to 8 Pin JST SH 1mm connector
- 1x 2nd ESC to Flight Controller 5 Pin to Free Wires (with JST SH crimp)
- 1x JST SH 8 Pin Plastic Housing
- 1x JST SH 10 Pin Plastic Housing
- 2x 2.00mm Header Pin for VTX Connection
- 2x 2.54mm Header Pin for Receiver Connection
- 1x JST 6 pin to AirUnit Connector
Découvrez aussi
F7 3030 V3 Flight Controller By Zeez
En stock
€74.90